LED Flood Light Manufacturer for Wholesale and Project Orders
JMRISON supplies COB and SMD LED flood lights for distributors, importers, contractors and lighting brands. Buyers can compare available housings, wattages, mounting brackets and electrical configurations according to their market and installation requirements.
For repeat wholesale orders or project sourcing, the selected model, housing, product label and packing requirements can be reviewed during sample approval before bulk production.
*Certificate availability and scope depend on the selected model and configuration.
What Buyers Can Review Before Ordering
COB and SMD Product Categories
Compare the available COB and SMD LED flood light models according to the required fixture structure, installation position and confirmed electrical data.
Product Specifications by Model
Review the confirmed wattage, input voltage, housing dimensions, mounting bracket and applicable lighting data for the selected model.
CE and CB Documents
CE and CB documents are available for applicable models. Confirm that the requested model, wattage and electrical configuration are included in the document scope.
Sample and Bulk Order Review
Use a sample to review the housing, bracket, cable position, product label and packing requirements before releasing a repeat or bulk order.
COB and SMD LED Flood Lights
JMRISON currently supplies two confirmed LED flood light categories. The final product selection should be based on the complete fixture model rather than the LED package name alone.
COB LED Flood Light
COB LED flood lights use a concentrated light-source arrangement inside the fixture. When a distributor needs to replace an existing COB model, the product appearance alone is not enough to confirm installation compatibility. Housing dimensions, bracket width, mounting-hole spacing, input voltage and driver configuration should be reviewed together.
Send an existing product label, fixture drawing or site photo when the new model must fit a prepared wall plate or steel support. JMRISON can compare this information with available COB models before a sample is approved.
COB Parameter Summary:
- Available Models: [Insert Confirmed Models]
- Wattage: [Insert Confirmed Wattage Range]
- Input Voltage: [Insert Confirmed Input Voltage]
- Dimensions: [Insert Confirmed Dimensions]
- IP Rating: [Insert Confirmed IP Rating]
- Mounting: [Insert Confirmed Mounting Structure]
SMD LED Flood Light
SMD LED flood lights use multiple LED packages arranged across a light board. Buyers should compare the finished fixture data, including wattage, lumen output, board layout, driver configuration, housing dimensions and mounting bracket, because the SMD source name alone does not define the result at the installation site.
For repeat wholesale orders, review the selected LED board, driver, product housing, label and packing during sample approval. These details create a reference for checking later production batches and reorders.
SMD Parameter Summary:
- Available Models: [Insert Confirmed Models]
- Wattage: [Insert Confirmed Wattage Range]
- Input Voltage: [Insert Confirmed Input Voltage]
- Dimensions: [Insert Confirmed Dimensions]
- IP Rating: [Insert Confirmed IP Rating]
- Mounting: [Insert Confirmed Mounting Structure]
How Should Buyers Compare COB and SMD LED Flood Lights?
COB and SMD describe the LED source arrangement, but they do not determine the complete fixture performance by themselves. Buyers should compare the selected model’s optical structure, driver, housing, dimensions, mounting bracket and confirmed lighting data.
Housing and Mounting
Compare the overall dimensions, bracket width, mounting holes and adjustment range of each selected model. These details are important when the new fixture must replace an installed product without modifying the supporting structure.
Wattage and Lumen Output
Check the confirmed wattage and lumen data for the specific COB or SMD model rather than assuming one source type always produces more light.
Driver Configuration
The internal driver affects input voltage compatibility and stability. Review the electrical configuration for the chosen model.
Sample Approval
Use a sample to check the actual light distribution, outdoor protection sealing, and maintenance access before confirming a bulk order.
Compare JMRISON LED Flood Light Models
Select one or more models to include in your inquiry. No online payment is required.
[Insert Confirmed Model 1]
[Insert Confirmed Model 2]
[Insert Confirmed Model 3]
What Should Buyers Confirm Before Ordering LED Flood Lights?
Application and Installation Area
A flood light installed close to a building facade has different coverage and glare constraints from one mounted above a loading area. Share the installation height, target surface, approximate dimensions and a site photo before choosing a product by wattage alone.
Wattage and Lumen Output
Two fixtures carrying the same wattage label may have different finished-fixture output. Confirm the rated wattage, lumen data and applicable test information of the selected model, especially when replacing an older LED, halogen or metal-halide fixture.
Beam Distribution and Coverage
A wider distribution can illuminate a larger nearby surface, while a more concentrated pattern may direct light toward a smaller or more distant area. Review the available beam information together with mounting height, aiming angle and the required illuminated zone.
Input Voltage and Driver
Confirm the destination-market voltage and frequency before sample approval. Record the selected driver, cable and electrical configuration with the product model so repeat orders do not depend only on the external housing appearance.
Mounting Structure
Check bracket width, mounting-hole spacing, adjustment range and the installation surface. These details affect whether the fixture can replace an existing product without drilling new holes or changing the supporting frame.
Outdoor Installation Conditions
For exposed installations, review the confirmed IP rating, cable entry, visible sealing structure and required mounting direction. Rain, dust, temperature changes and coastal conditions should be discussed for the selected model rather than treated as a general feature of every LED flood light.
LED Flood Lights for Commercial and Industrial Environments
Building Facade Lighting
For exterior walls and entrances, mounting distance, aiming angle and the required light pattern affect the product choice. Share a facade photo and approximate dimensions so an available COB or SMD model can be reviewed against the surface and installation position.
Discuss Facade LightingParking and General Outdoor Areas
Parking and circulation areas require attention to mounting height, coverage between fixtures and glare toward drivers or nearby properties. Product output and beam information should be reviewed together before confirming fixture quantity.
Discuss Outdoor Area LightingIndustrial Yards and Loading Areas
Industrial yards may expose fixtures to dust, changing weather and long operating periods. Confirm the housing, voltage, mounting bracket, cable entry and maintenance access of the selected model before approving a sample.
Discuss an Industrial ApplicationSigns and Commercial Exteriors
Sign lighting depends on fixture distance, sign dimensions and the required uniformity across the surface. Increasing wattage will not correct an unsuitable mounting position or beam distribution.
Discuss Sign LightingReview the Fixture Beyond the Front View
Mounting Bracket
Confirm the bracket width, material thickness, adjustment range and mounting-hole dimensions when the fixture must connect to an existing wall plate or steel support.
Cable Entry
Review the cable position and available cable length before confirming the junction-box location. The cable entry and visible sealing structure should also match the intended installation direction.
Product Label
The model number, electrical data and required market information should match the approved specification, quotation and carton documents.
Rear Housing
The rear housing affects overall dimensions, mounting clearance and maintenance access. Use the confirmed dimensional drawing when the fixture must be installed close to a wall or supporting frame.
Review Product Data Before Sample Approval
Electrical Data
- Rated Wattage
- Input Voltage
- Frequency
- Power Factor
- Driver Information
- Surge Protection
- Dimming, if applicable
Lighting Data
- Lumen Output
- Luminous Efficacy
- Color Temperature
- CRI
- Beam Angle or Distribution
- IES or LDT File Availability
Mechanical Data
- Product Dimensions
- Housing Material
- Glass or Lens Material
- Bracket Type
- Mounting-Hole Dimensions
- Cable Length
- Net Weight
Packing and Order Data
- Model Number
- Units per Carton
- Carton Dimensions
- Gross Weight
- MOQ
- Sample Availability
- Production Lead Time
Reduce Uncertainty Before a Repeat Order
Sample and Production Consistency
A distributor may approve the external appearance of a sample but still face problems if the driver, LED board, cable or label changes in the bulk order. Record the approved housing, light source, electrical configuration and packing against the confirmed model before production.
Replacement Installation
When a new fixture replaces an installed product, differences in bracket width, mounting holes or cable position may create additional work at the site. Send the existing fixture dimensions and installation photo before selecting the replacement model.
Product Documentation
Importers often need product images, dimension drawings, certificates, datasheets and carton information before listing a model. Organize these files by confirmed model so the buyer can match every document to the correct product.
Batch Identification
Use consistent model numbers on quotations, product labels, cartons and technical files. This gives purchasing and warehouse teams a clear reference when checking repeat orders or replacement stock.
See How JMRISON LED Flood Lights Are Produced
This video shows actual JMRISON production activities related to LED lighting products. Depending on the footage and selected model, buyers may see component preparation, assembly, wiring, lighting checks, product inspection or packing.
For a repeat or bulk order, the production process should follow the approved model and confirmed specification. Ask which production stages and checks apply to the selected COB or SMD LED flood light.
- Component Preparation
- COB or SMD Assembly
- Driver and Wiring
- Housing Assembly
- Lighting Check
- Appearance Inspection
- Packing
Checks Based on the Confirmed Product and Order
Incoming Component Review
Check applicable housings, COB sources or SMD boards, drivers, cables and brackets against the confirmed model before assembly.
Assembly Review
Review visible wiring, fasteners, bracket movement, front glass or lens condition, cable entry and external appearance during assembly.
Lighting and Electrical Check
Power on the assembled fixture and complete the applicable lighting or electrical checks according to the selected model and purchase requirement.
Label and Packing Check
Verify the model label, accessories, product quantity, carton information and agreed packing before shipment preparation.
Inspection content varies by model, configuration and purchase agreement. Ask for the applicable inspection information when confirming an order.
CE and CB Documents for Applicable Products
JMRISON has CE and CB certification materials. Buyers should confirm whether the requested model, wattage and electrical configuration are included in the scope of the relevant document before using it for market review, project submission or internal approval.
Certificate availability and scope must be checked against the selected model.
LED Lighting Products Presented at Industry Exhibitions
These exhibition photos show JMRISON presenting LED lighting products and discussing product appearance, specifications and sourcing requirements with industry visitors in offline business settings.
Confirm the Product Before Building Your Market Range
For distributors and lighting brands, an OEM discussion can begin with an existing JMRISON COB or SMD model. Confirm the required logo, product label, carton information, manual, housing color and electrical configuration before evaluating the order quantity and production arrangement.
Use a sample to review the fixture appearance, mounting bracket, dimensions, cable position and applicable specifications. The approved model and agreed configuration should then be referenced in the quotation and bulk-production documents.
Customization Options (Subject to confirmation):
- Logo
- Product Label
- Carton Marks
- Packaging
- Instruction Manual
- Housing Color
- Selected Driver Options
OEM options, MOQ and production lead time depend on the selected model, order quantity and requested changes.
A Clear LED Flood Light Sourcing Process
1. Share Your Requirements
Send the required product category, application, estimated quantity, destination market and any available product photos, labels, mounting drawings or site information.
2. Compare Available Models
Review available COB or SMD models according to the required wattage, input voltage, housing, mounting structure and installation environment.
3. Confirm a Sample
Review the product appearance, bracket, dimensions, cable, label and applicable electrical configuration before approving the selected model.
4. Confirm Order Details
Record the approved model, quantity, packaging, labeling and applicable configuration in the quotation and purchase documents.
5. Production and Shipment Preparation
Complete the applicable production checks and verify the product model, quantity, label and carton information before shipment preparation.
Direct Answers for Product Selection and Purchasing
What is an LED flood light?
What is the difference between COB and SMD LED flood lights?
How do I choose LED flood light wattage?
How many lumens do I need?
What beam angle should I choose?
Are LED flood lights suitable for outdoor use?
What are the common problems with LED flood lights?
Can an LED flood light replace a metal-halide flood light?
Can JMRISON provide CE and CB documents?
Can I request a sample before a bulk order?
Does JMRISON support OEM LED flood light orders?
What should I send for a quotation?
Continue Your LED Flood Light Research
Get an LED Flood Light Recommendation and Quotation
Discuss LED Flood Lights on WhatsApp
Scan the QR code to send product photos, mounting details, required wattage or estimated quantity directly to the JMRISON team.
WhatsApp: +8618676425884
Open WhatsAppSource COB and SMD LED Flood Lights From JMRISON
Share your target market, application, estimated quantity and required product configuration. JMRISON can help you compare available COB and SMD models, review applicable CE or CB documents, and prepare a sample or quotation discussion.
Wholesale inquiries, sample requests, OEM discussions and project-based product selection are welcome.